 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| CRO3064A 9939 Via Pasar * San Diego, CA 92126 TEL (858) 621-2700 FAX (858) 621-2722 VOLTAGE CONTROLLED OSCILLATOR Rev A1 PHASE NOISE (1 Hz BW, typical) -40 -60 -80 -100 -120 -140 -160 1000 FEATURES * Frequency Range: 3064 - 3064 MHz * Tuning Voltage: 0.5-4.5 Vdc * MINI-16 - Style Package APPLICATIONS * Point to Point Radio * Fixed Wireless Equipment * Satellite Communications PERFORMANCE SPECIFICATIONS Oscillation Frequency Range Phase Noise @ 10 kHz offset (1 Hz BW, typ.) Harmonic Suppression (2nd, typ.) Tuning Voltage Tuning Sensitivity (avg.) Power Output Load Impedance Input Capacitance (max.) Pushing Pulling (14 dB Return Loss, Any Phase) (f) (dBc/Hz) 10000 100000 OFFSET (Hz) VALUE 3064 - 3064 -116 -18 0.5-4.5 9 43 50 50 <1 <1 -40 to 85 MINI-16 5 20 Vdc mA pF MHz/V MHz C UNITS MHz dBc/Hz dBc Vdc MHz/V dBm Operating Temperature Range Package Style POWER SUPPLY REQUIREMENTS Supply Voltage (Vcc, nom.) Supply Current (Icc, typ.) APPLICATION NOTES * AN-100/1 : Mounting and Grounding of VCOs * AN-102 : Proper Output Loading of VCOs * AN-107 : How to Solder Z-COMM VCOs All specifications are typical unless otherwise noted and subject to change without notice. NOTES: (c) Z-Communications, Inc. Page 1 All rights reserved LOW COST - HIGH PERFORMANCE VOLTAGE CONTROLLED OSCILLATOR TUNING CURVE, typ. 3100 3095 3090 3085 3080 3075 3070 3065 3060 3055 3050 3045 3040 3035 3030 3025 0 0.5 1 1.5 2 2.5 3 3.5 4 CRO3064A PAGE 2 FREQUENCY (MHz) 85 25 -40 c c c 4.5 TUNING VOLTAGE (Vdc) POWER CURVE, typ. POWER OUTPUT (dBm) 6 5 4 25 3 c 2 3044 3049 3054 3058 3063 3067 3072 3076 3081 3086 FREQUENCY (MHz) PHYSICAL DIMENSIONS TYPICAL OF ALL PADS SEE NOTE 3 MINI-16 415-0061 REV. D (DRAWING NOT TO SCALE) .070 .037 .031 .026 0.220 0.115 0.320 0.420 0.475 0.000 0.500 .052 .114 0.500 0.475 P2 DETAIL A 0.415 0.405 P1=VT P2=RF OUT P3=Vcc TABS RANGE: SEE NOTE 5. (4 PLACES) 0.305 P3 0.315 -.005 .465 0.205 0.215 BOTTOM VIEW 0.105 0.025 0.000 0.025 0.085 0.185 P1 NOTES: 1. THE INSIDE RADIUS OF ALL 16 HALF HOLES AT THE PERIMETER OF THE BOARD ARE PLATED TO PROVIDE A SURFACE FOR THE ATTACHMENT OF THE VCO TO A PCB, IN 13 LOCATIONS, WITH 3 PADS BEING USED FOR ELECTROMECHANICAL INTERFACE. 16 SOLDER LOCATIONS REQUIRED. 2. THE SURFACE OF THE SHIELD IS TIN PLATED AND MAY BE SOLDERED TO. THE SHIELD'S BASE METAL IS COLD ROLLED STEEL. 3. THE GROUND PLANE IS GROUND AND ATTACHES TO A GROUND TRACK ON THE UPPER SIDE OF THE BOARD AS WELL AS THE SHIELD BY PTH. 4. UNLESS OTHERWISE NOTED ALL DIMENSIONS ARE IN INCHES. 5. UNLESS OTHERWISE NOTED ALL TOLERANCES ARE AS FOLLOWS: TOLERANCES .XXX= .010 0.115 SEE DETAIL 'A' .220 .034 0.000 .070 TYP .150 TYP 0.285 GROUND PLANE SOLDER PLATED 0.385 0.500 (c) Z-Communications, Inc. Page 2 Printed in the U.S.A. |
Price & Availability of CRO3064A
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |